Car Detailing – Improving the Look of Your Car

Car detailing is defined as the process of meticulously cleaning, polishing and protecting all the parts of an automobile from top to the bottom and from inside the car to the outside of the car by using special tools and other products that are not normally used by car cleaners. It does not include heavy body repairs or paintwork of the cars, but sometimes does include restorative light cosmetic work depending upon the vehicle condition and the person or Detailer attending to it. The main aim of car detailing is to thoroughly enhance and significantly restore the original looks of the vehicle involved.

Car detailing helps in the elimination of light scratches or marks on the paintwork of the car. Car detailing is classified into two major types-exterior detailing and interior detailing. Exterior detailing involves restoring, vacuuming and surpassing of the original conditions of the exterior parts of the vehicle like wheels, tires and windows among the other components. Products generally used for exterior detailing are wax, polishes, degreasers and detergents.

INTERIOR CAR DETALING

Interior car detailing involves the cleaning of the inner parts of the car or vehicle that is components like plastics, leather, vinyl, natural fibers and carbon fiber plastics. For cleaning of the interiors of the car various different techniques like vacuuming and steam cleaning are used. Interior detailing requires more time and effort when compared to exterior detailing. Interiors of a vehicle are prone to bad odor, allergens due to dust, stains, grits, which can cause switches to be prone to failure, hazy windows which obscure the driver’s view etc.

Standard processes include vacuuming along with steam cleaning and brushing for interior car detailing. Vacuuming of seats, trunk, shelf, headliners and the rear area for cargo is necessary. Floor mats should be cleaned separately and air compressor can be used for areas which cannot be reached by a vacuum cleaner. Brush and steam cleaning are done for the cleaning of mats and carpets. Mats are thoroughly scrubbed to remove any blemishes or stains and for more effective results, steam cleaning is used. Glass cleaners are used for cleaning the window glasses of the vehicle. For leather parts, leather soap, saddle soap and a leather cleaner are used and wiped with a damp cloth.

Re-vacuuming and wiping of the car parts is important so as to remove any left over dirt and this helps restore the original shine of the car.

EXTERIOR CAR DETAILING

Exterior car detailing involves processes like washing, drying, claying, polishing, sealing etc. In detailing of the car, washing is done by spraying with a high powered specialized spray followed by hand washing thoroughly the different parts of the car like door jambs, tire rims, glasses etc.

The next step is using a clay bar for removing impurities like residues or overspray traces. Polishing of the car helps give it back its original shine and a sealant is applied to give the car a rich and glossy shine

Posted in Uncategorized | Comments Off on Car Detailing – Improving the Look of Your Car

How to Keep Your Car Maintained – Go to Car Detailing Business People

Car detailing involves extremely detailed cleaning and polishing and then waxing of the car from both inside and outside to show case a quality detailing of the car. You can do the detailing for your personal satisfaction or to prepare your car for any car rallies where your car would be featured. Detailing not only improves the appearance of the cars, but also helps in preserving the car and thus the car can have increased resale value.

You can contact anyone who is in the car detailing business to do your car detailing. The person would detail your car from outside as well as from inside. In outside or the exterior detailing your car is cleaned and a shine is brought to the car’s paint, the windscreen and the windows. Even the wheels and the tyres are cleaned and polished.

How is this done? When you take your car to the car detailing business shop, your car is taken to the washing bay, for proper care of the tyres, wheels, bumpers, doorjambs, grills, and all the other hidden spots of the car during the washing of the car. Then the exteriors and the tyres are cleaned to remove any bugs, road tar and other things that are trapped in them. The next step that the car detailing business people is the evaluation of the paint of the car to decide the procedure as to how they will polish your car paint and buff it to make the paint finish as original as possible.

The car detailing business shop then uses various types of polishes with power buffer and foam pads to remove the scuffs, scratches, and any other minor imperfections present in the paint. The detailer decides the products that he has to use depending upon the condition of the paint of your car. After a sequence of steps, you get a glossy, smooth paint finish and your car exterior becomes almost same, as it was when you bought it.

The next step is to apply quality wax on the surface to protect the paint from the grim and dirt. A single or double coat of polish is applied to the exteriors by hand. The last step of the exterior detailing is to polish all the exterior trimmings, and the rubber pieces of your automobile, including the door handles, the windows rubber trimmings, and finally the polishing of the glass.

After the exterior comes the interior detailing. In the car detailing business the Interior detailing involves the cleaning from the inside the passenger compartment. This is achieved with the help of vacuuming, Steam cleaning, brushing, and liquid cleaning to remove the stains on the interior upholstery. The complete car detailing takes almost a day to complete and lasts for nearly 8 -12 months.

Posted in Uncategorized | Comments Off on How to Keep Your Car Maintained – Go to Car Detailing Business People

What Is Car Detailing?

Car detailing, or auto detailing is a term that is used allot nowadays and it can have different meanings to different People. For example, in America the term detailing usually refers to most kinds of car cleaning, whereas in the U.K the term ‘car valeting’ is more predominantly used to describe most car cleaning activities, with the term detailing only fairly recently being adopted to describe a more thorough clean.

Generally, the correct definition for the term car detailing is to meticulously clean, polish and protect all parts of a vehicle from top to bottom, inside and out, using specialist tools and products that would not usually be used by your typical car cleaner. It does not however, include paintwork and body repairs although sometimes light cosmetic restorative work will be untertaken, for example stone chip touch ups and clear coat wet sanding, depending on the condition of the vehicle and the detailer in question.

The main area and aim of car detailing is to fully enhance and restore the vehicles paintwork by eliminating light scratches and swirl marks that have been inflicted over time and that reflect the light in such a way that they give an unsightly cob webbing effect on the surface of the paint or clear coat. Before this is undertaken though, the exterior has to be thoroughly washed and cleaned in order to remove as much dirt and as many contaminants as possible.

The first step of the exterior detailing process is usually to foam the vehicle completely and allow it to soak, this helps to soften up any dirt and lift it off from the surface prior to pre rinsing. Whilst soaking, a soft bristled detailing brush may be used to agitate areas like the window rubbers, plastic grills, trim details and badges. The foam, along with the loosened dirt and grime is then thoroughly rinsed off.

Before washing the paintwork, wheels and wheel wells/arches are usually cleaned as these tend to be the dirtiest and most contaminated parts of a vehicle. Specialist brushes and wheel cleaning products are used to remove grime and baked on brake dust from all areas of the wheels and wells/arches including suspension components, brake calipers, around lug nuts and even from the wheel rears.

After the wheels and arches have been thoroughly cleaned, the paintwork can then be washed from top to bottom using plush wash mitts instead of sponges and soft micro fibre towels instead of chamois leathers in conjunction with the two bucket technique and grit guards, which all help to prevent any damage (in the form of light scratches and swirl marks) from being inflicted. The complete wash process including the wheels and arches can take anywhere up to two hours to complete, depending on the size and condition of the vehicle.

After washing, paintwork is clayed using a specialist automotive clay bar and lubricant which gently removes any bonded surface contaminants that washing alone cannot remove. This is an important step in the car detailing process as these contaminants can hinder the polishing process and prevent a top quality finish from being achieved.

After the paintwork has been properly cleaned and prepared it is then polished to remove any light scratches, swirl marks, hazing, oxidation and other surface imperfections. This is usually done with a rotary or dual action polishing machine as they allow the polish products to be thoroughly worked into the surface and broken down and so generally create better results. However, paintwork can effectively be polished by hand using the right products and great results can also be achieved with enough time and effort.

The polishing process is usually a multi-step task, as differing abrasive grades of polish are used to correct and refine the finish and it can take a number of hours or even days to complete, again, depending on the size and condition of the vehicle. This is usually the most involving, labour intensive and time consuming part of the car detailing process.

After being polished and corrected of any imperfections, the paintwork is then protected and sealed. Some detailers choose to use a pre wax cleansing product which prepares the paint for wax and ensurers it bonds to the surface properly. High quality natural carnauba based paste waxes and synthetic polymer sealants are used to provide months of tough, long lasting protection and create an incredible shine. Multiple layers of wax and sealant are often applied to ensure optimum durability and shine are achieved and it is not uncommon for high end carnauba paste waxes to cost hundreds or even thousands of dollars.

Once the paintwork has been sufficiently polished, enhanced and protected, the other exterior parts are then dealt with. Windows and glass are also polished and protected, as are any metal and chrome parts. Rubbers, plastics and vinyls are revived and dressed to help bring them back to life and protect them from the elements. The wheels and even the brake calipers may also be polished and waxed using designated products which further enhance and protect them and give a level of detail beyond that of a normal vehicle clean.

The engine bay area is also always properly cleaned, polished, dressed and protected during the car detailing process, using a range of cleaning products and brushes, but it varies from person to person at which part in the process it is undertaken. Some prefer to tackle it first before the rest of the car, while others may clean it after the exterior has been detailed, before moving onto the interior.

An interior detail comprises of all upholstery being vacuumed and thoroughly shampooed to remove any contaminants and stains, while also brightening and freshening it up. Headlining is cleaned, leather is thoroughly scrubbed to remove any dirt from deep in the grain and is then conditioned and protected. Plastics, vinyl and trim are cleaned and dressed using appropriate products to revive and protect them from the sun, then the interior glass is also cleaned and polished to give a crystal clear, smear free finish.

The interior detailing process is also very involved and time consuming as every area including even the smallest vent and switch are properly dealt with using a wide variety of brushes, swabs and micro fibre towels to remove the smallest dust particles from the tightest of areas.

The general practice of car detailing is undertaken to ensure that the vehicle is kept in as good condition as possible during ownership. Once a full detail has been undertaken, mini details or maintenance cleans can be performed on a regular basis which will not be as involved as a full detail yet will help to give all parts of the vehicle that ‘just detailed’ look.

Car detailing helps to retain much of a vehicles original value and it can also add a considerable amount to the value of older more neglected or abused vehicles that have never seen that level of care. Overall, car detailing is the process of thoroughly cleaning, enhancing, restoring and protecting all parts of a vehicle, in order to keep it looking its very best and retain much of its value and a detail differs from your average car clean because of the levels of involvement, the time spent, the tools & products used and the quality of results that are achieved by the end of the process.

Posted in Uncategorized | Comments Off on What Is Car Detailing?